The ZKS vacuum feeder uses a vacuum pump to drag the air, so that the inlet of the suction nozzle and the whole system are in a certain vacuum state.
The ZKS vacuum feeder uses a vacuum pump to drag the air, so that the inlet of the suction nozzle and the whole system are in a certain vacuum state.
+86 13921209007
director@wtgrinderline.com
The powder particles are sucked into the nozzle along with the outside air to form an air stream, which passes through the suction pipe and reaches the hopper. The separated material enters into the receiving equipment. The feeding and discharging device are completed by continuously opening and closing the pneumatic three-way valve and it’s controlled by the control panel.
|
Model |
Power(kw) |
Feeding capacity(kg/h) |
|
ZKS-1 |
1.5 |
400 |
|
ZKS-2 |
2.2 |
600 |
|
ZKS-3 |
3 |
1200 |
|
ZKS-4 |
5.5 |
2500 |
|
ZKS-6 |
5.5 |
3200 |
|
ZKS-7 |
7.5 |
6000 |
|
ZKS-10-6 |
7.5 |
6000(Conveying distance 10 meters) |
|
ZKS-20-5 |
11 |
5000(Conveying distance 20 meters) |
![]() |
![]() |
![]() |



A food plant was losing nearly 4 percent of every batch as dust and broken granules during transfer from the mixer to the packing line. The problem w...
View MoreChoosing between dense phase and dilute phase pneumatic conveying is not about finding a universally better option. The decision depends on the mater...
View MoreIf the outlet of your grinder sits at floor level and the inlet of your mixer or packaging machine waits three metres above it, the vertical link bet...
View More